Command line interface
This page shows the Stevedore’s available commands
build
Stevedore command to build images.
Usage:
stevedore build <image> [flags]
Examples:
stevedore build ubuntu-base --image-version impish --tag 21.10 --pull-parent-image --push-after-build --remove-local-images-after-push
Flags:
--ansible-connection-local When this flag is enabled, ansible uses local connection [only applies to ansible-playbook driver]
--ansible-intermediate-container-name string Name of an intermediate container that can be used during ansible build process [only applies to ansible-playbook driver]
--ansible-inventory-path string Specify inventory hosts' path or comma separated list of hosts [only applies to ansible-playbook driver]
--ansible-limit string Further limit selected hosts to an additional pattern [only applies to ansible-playbook driver]
--build-on-cascade When this flag is enabled, children images are also built
--builder-name string [DEPRECATED FLAG] use 'ansible-intermediate-container-name' instead of 'builder-name'
--cascade [DEPRECATED FLAG] use 'build-on-cascade' instead of 'cascade'
--cascade-depth int Number children levels to build when build on cascade is executed (default -1)
--concurrency int Number of images builds that can be excuted at the same time
--connection-local [DEPRECATED FLAG] use 'ansible-connection-local' instead of 'connection-local'
--dry-run When this flag is enabled, the built is executed in dry-run mode
--enable-semver-tags When this flag is enabled, and main version is semver 2.0.0 compliance extra tag are created based on the semantic version tree
-h, --help help for build
--image-from string [DEPRECATED FLAG] use 'image-from-name' instead of 'image-from'
-I, --image-from-name string Image parent's name (default "-")
-N, --image-from-namespace string Image parent's registry namespace (default "-")
-R, --image-from-registry string Image parent's registry host (default "-")
-V, --image-from-version string Image parent's version (default "-")
-i, --image-name string Image name. Its value overrides the name on the images tree definition (default "-")
-r, --image-registry-host string Image registry host (default "-")
-n, --image-registry-namespace string Image namespace (default "-")
-v, --image-version strings List of versions to build
--inventory string [DEPRECATED FLAG] use 'ansible-inventory-path' instead of 'inventory'
-l, --label strings List of labels to assign to the image
--limit string [DEPRECATED FLAG] use 'ansible-limit' instead of 'limit'
--namespace string [DEPRECATED FLAG] use 'image-registry-namespace' instead of 'namespace'
--no-push [DEPRECATED FLAG] 'no-push' is the stevedore default behaviour, use --push-after-build to push an image
--num-workers int [DEPRECATED FLAG] use 'concurrency' instead of 'num-workers'
-L, --persistent-label strings List of persistent labels to set during the build process. Persistent labels inherited from parent has precedence over the current ones. The format of each variable must be <key>=<value>
-p, --persistent-variable strings List of persistent variables to set during the build process. Persistent variable inherited from parent has precedence over the current ones. The format of each variable must be <key>=<value>
--pull-parent-image When this flag is enabled, parent image is pulled from docker registry
--push-after-build When this flag is enabled, the image is pushed to docker registry after the build
--registry string [DEPRECATED FLAG] use 'image-registry-host' instead of 'registry'
--remove-local-images-after-push When this flag is enabled, images are removed from local after push
-T, --semver-tags-template strings List of templates to generate tags following semantic version expression
--set strings [DEPRECATED FLAG] use 'variable' instead of 'set'
--set-persistent strings [DEPRECATED FLAG] use 'persistent-variable' instead of 'set-persistent'
-t, --tag strings List of extra tags to generate
--use-docker-normalized-name Use Docker normalized name references
-x, --variable strings Variables to set during the build process. The format of each variable must be <key>=<value>
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
completion
Stevedore command to generate shell completions. Here you could find more details about the completion.
Usage:
stevedore completion [flags]
Flags:
-h, --help help for completion
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
To load stevedore completion run
$ . <(stevedore completion)
To configure your bash shell to load completions for each session add to your bashrc
# ~/.bashrc or ~/.profile
. <(stevedore completion)
create
Stevedore command to create items.
Usage:
stevedore create [flags]
stevedore create [command]
Aliases:
create, generate
Available Commands:
configuration Stevedore subcommand to create and initizalize the configuration
credentials Stevedore subcommand to create a credentials badge to credentials store
Flags:
-h, --help help for create
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
Use "stevedore create [command] --help" for more information about a command.
create configuration
Stevedore subcommand to create and initialize the configuration.
Usage:
stevedore create configuration [flags]
Aliases:
configuration, config, conf, cfg
Examples:
Example setting all configuration parameters:
stevedore create configuration --builders-path /builders --concurrency 4 --config /stevedore-config.yaml --credentials-format json --credentials-local-storage-path /credentials --credentials-storage-type local --enable-semver-tags --force --images-path /images --log-path-file /logs --push-images --semver-tags-template "{{ .Major }}" --semver-tags-template "{{ .Major }}_{{ .Minor }}"
Flags:
-b, --builders-path string It defines the path to locate the builders definition. Its default value is 'stevedore.yaml' (default "stevedore.yaml")
-c, --concurrency int It defines the number of concurrent workers created to build images. Its default value is '4' (default 4)
-C, --config string Configuration file location path
--credentials-encryption-key string Is the encryption key used on the credentials store
--credentials-format string Format used to store credentials. The accepted formats are: json and yaml (default "json")
--credentials-local-storage-path string When is used the 'local' storage, it defines the path to store the credentials. Its default value is 'credentials' (default "credentials")
--credentials-storage-type string It defines the storage type. Its default value is 'local' (default "local")
-s, --enable-semver-tags Generate extra tags when the main image tags is semver 2.0.0 compliance. Its default value is 'false'
--force Force to create configuration file when the file already exists
--generate-credentials-encryption-key It creates a random encryption key for the credentials store
-h, --help help for configuration
-i, --images-path string It defines the path to locate the images definition. Its default value is 'stevedore.yaml' (default "stevedore.yaml")
-l, --log-path-file string Log file location path. Its default value is ''
-p, --push-images On build, push images automatically after it finishes. Its default value is 'false'
-t, --semver-tags-template strings List of templates which define those extra tags to generate when 'semantic_version_tags_enabled' is enabled. Its default value is '[{{ .Major }}.{{ .Minor }}.{{ .Patch }}]' (default [{{ .Major }}.{{ .Minor }}.{{ .Patch }}])
Global Flags:
--debug Enable debug mode
create credentials
Stevedore subcommand to add a credential to the credentials store.
Usage:
stevedore create credentials [flags]
Aliases:
credentials, auth, badge
Examples:
Create credentials to authenticate through basic auth into a private registry:
stevedore create credentials myregistry --username username
Create credentials to achieve credentials from AWS ECR using the default credentials chain:
stevedore create credentials ecr-host --aws-region eu-west-1 --aws-use-default-credentials-chain
Flags:
--allow-use-ssh-agent When this flag is enabled, is allowed to use ssh-agent
--ask-private-key-password When this flag is enabled, you will be asked for a private key password
--aws-access-key-id string AWS Access Key ID to achieve credentials from AWS to achieve credentials from AWS. AWS Secret asked key is going to be requested
--aws-profile string AWS Profile to achieve credentials from AWS
--aws-region string AWS Region to achieve credentials from AWS
--aws-role-arn string AWS Role ARN to achieve credentials from AWS
--aws-shared-config-files strings List of AWS shared config files to achieve credentials from AWS
--aws-shared-credentials-files strings List AWS shared credentials files to achieve credentials from AWS
--aws-use-default-credentials-chain When is used that flag, AWS default credentials chain is used to achieve credentials from AWS
-d, --credentials-dir string [DEPRECATED FLAG] 'credentials-dir' is deprecated and will be ignored. Credentials parameters are set through the 'credentials' section of the configuration file or using the flag 'local-storage-path'
--force When this flag is enabled, credentials creation is forced. It overwrites the existing value
--git-ssh-user string Git SSH User
-h, --help help for credentials
--local-storage-path string Path where credentials are stored locally, using local storage type
--private-key-file string Private Key File
-r, --registry-host string [DEPRECATED FLAG] credentials id must be passed as command argument instead of using 'registry-host' flag
--username string Username for basic auth method. Password is going to be requested
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
get
Stevedore command to get items information.
Usage:
stevedore get [flags]
stevedore get [command]
Aliases:
get, list
Available Commands:
builders Stevedore subcommand to get builders information
configuration Stevedore subcommand to get configuration information
credentials Stevedore subcommand to get credentials information
images Stevedore subcommand that show detail about images definition
Flags:
-h, --help help for get
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
Use "stevedore get [command] --help" for more information about a command.
get builders
Stevedore subcommand to get builders information.
Usage:
stevedore get builders [flags]
Aliases:
builders, builder, b
Examples:
Get builder filtered by name:
stevedore get images --filter name=golang-app
Get builder filtered by driver:
stevedore get images --filter driver=docker
Flags:
-f, --filter strings List of filters to apply. Filters must be defined on the following format: <attribute>=<value>
-h, --help help for builders
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
get configuration
Stevedore subcommand to get configuration information.
Usage:
stevedore get configuration [flags]
Aliases:
configuration, config, conf, cfg
Examples:
stevedore get configuration
Flags:
-h, --help help for configuration
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
get credentials
Stevedore subcommand to get credentials information.
Usage:
stevedore get credentials [flags]
Aliases:
credentials, auth, auths, cred, creds, credential
Example:
stevedore get credentials
Flags:
-h, --help help for credentials
--show-secrets When this flag is enabled, the output provide secrets
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
get images
Stevedore subcommand that shows detail about the defined images.
Usage:
stevedore get images [flags]
Aliases:
images, image, i, img
Examples:
Get images filtered by name:
stevedore get images --filter name=app1
Get images filtered by registry:
stevedore get images --filter registry=registry.test
Flags:
-f, --filter strings List of filters to apply. Filters must be defined on the following format: <attribute>=<value>
-h, --help help for images
-t, --tree When this flag is enabled, output is returned in tree format
--use-docker-normalized-name Use Docker normalized name references
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
init
Stevedore init command is an alias for stevedore create configuration command.
promote
Stevedore command to promote, publish or copy images to a docker registry or namespace.
Usage:
stevedore promote [flags]
Aliases:
promote, publish, copy
Examples:
stevedore promote ubuntu:impish --romote-image-registry myregistry.example.com --promote-image-namespace mynamespace
Flags:
-D, --dry-run Dry run promotion
-S, --enable-semver-tags When this flag is enabled, and main version is semver 2.0.0 compliance extra tag are created based on the semantic version tree
-s, --force-promote-source-image When this flag is enabled, the source image is also promoted, along with any other target image
-h, --help help for promote
-i, --promote-image-name string Target image name (default "-")
-r, --promote-image-registry-host string Target image registry host (default "-")
-n, --promote-image-registry-namespace string Target image registry mamespace (default "-")
-t, --promote-image-tag strings List of target image tags
--remove-local-images-after-push When this flag is enabled, images are removed from local after push
--remove-promote-tags remove-local-images-after-push [DEPRECATED FLAG] use remove-local-images-after-push instead of `remove-promote-tags`
-T, --semver-tags-template strings List templates to generate tags following semantic version expression
--use-docker-normalized-name Use Docker normalized name references
-R, --use-source-image-from-remote When this flag is enabled, source images is downloaded from remote Docker registry
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
version
Stevedore command to print the binary release version.
Usage:
stevedore version [flags]
Flags:
-h, --help help for version
Global Flags:
-c, --config string Configuration file location path
--debug Enable debug mode
Last modified April 24, 2023: create docs-v0.11 (331b058)